Hello,
according to this page:
http://iandw.net/2014/10/12/fancontrol-under-ubuntu-14-04-resolving-usrsbinpwmconfig-there-are-no-pwm-capable-sensor-modules-installed/it is possible to have fancontrol running. This would be good for this laptop, which has the fan starting often as if it want to mimic the wind blowing outside.
However for this Acer laptop, after following the steps described, it still does not work. Here is what the hardware holds:
Acer Aspire 7730ZG
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce 9300M GS] (rev a1)
06:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
07:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
$ hurricane
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2014-03-11 13:12+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2014-07-07 12:12+0000X-Generator: Launchpad (build 17086)
produit: Aspire 7730ZG ()
fabriquant: Acer, inc.
version: Not Applicable
numéro de série: XXXXXXXXXXXXXXXXXXX
bits: 64 bits
fonctionnalités: smbios-2.5 dmi-2.5 vsyscall32
configuration: administrator_password=disabled boot=normal frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=400473FC-56B2-DC11-AD5B-00238B70AD80
*-core
description: Carte mère
produit: Mammoth
fabriquant: Acer, Inc.
identifiant matériel: 0
version: Not Applicable
numéro de série: XXXXXXXXXXXXXx
*-firmware
description: BIOS
fabriquant: Acer
identifiant matériel: 0
version: v0.3611
date: 10/17/2008
taille: 108KiB
capacité: 960KiB
fonctionnalités: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb agp biosbootspecification
*-cpu
description: CPU
produit: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: CPU Version
emplacement: U2E1
taille: 1GHz
capacité: 1GHz
bits: 64 bits
horloge: 166MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq
configuration: cores=2 enabledcores=2 threads=2
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1 Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: asynchronous internal write-back
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: L2 Cache
taille: 1MiB
capacité: 4MiB
fonctionnalités: burst internal write-back
*-memory
description: Mémoire Système
identifiant matériel: 15
emplacement: Carte mère
taille: 4GiB
*-bank:0
description: SODIMM DDR2 Synchrone 667 MHz (1,5 ns)
produit: SODIMM000
fabriquant: Mfg 0
identifiant matériel: 0
numéro de série: 1234-B0
emplacement: M1
taille: 2GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-bank:1
description: SODIMM DDR2 Synchrone 667 MHz (1,5 ns)
produit: SODIMM001
fabriquant: Mfg 1
identifiant matériel: 1
numéro de série: 1234-B1
emplacement: M2
taille: 2GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-pci
description: Host bridge
produit: Mobile 4 Series Chipset Memory Controller Hub
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 07
bits: 32 bits
horloge: 33MHz
*-pci:0
description: PCI bridge
produit: Mobile 4 Series Chipset PCI Express Graphics Port
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 07
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:40 portE/S:2000(taille=4096) mémoire:cc000000-ceffffff portE/S:d0000000(taille=268435456)
*-display
description: VGA compatible controller
produit: G98M [GeForce 9300M GS]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
ressources: irq:48 mémoire:ce000000-ceffffff mémoire:d0000000-dfffffff mémoire:cc000000-cdffffff portE/S:2000(taille=128)
*-usb:0
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #4
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:16 portE/S:1800(taille=32)
*-usb:1
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #5
fabriquant: Intel Corporation
identifiant matériel: 1a.1
information bus: pci@0000:00:1a.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:21 portE/S:1820(taille=32)
*-usb:2
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #6
fabriquant: Intel Corporation
identifiant matériel: 1a.2
information bus: pci@0000:00:1a.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:1840(taille=32)
*-usb:3
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a.7
information bus: pci@0000:00:1a.7
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:19 mémoire:f0504800-f0504bff
*-multimedia
description: Audio device
produit: 82801I (ICH9 Family) HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 03
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:46 mémoire:f0500000-f0503fff
*-pci:1
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:41 portE/S:3000(taille=4096) mémoire:c0000000-c01fffff portE/S:c0200000(taille=2097152)
*-pci:2
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 3
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:42 portE/S:4000(taille=4096) mémoire:c0400000-c06fffff portE/S:c0700000(taille=3145728)
*-generic:0
description: System peripheral
produit: SD/MMC Host Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0
information bus: pci@0000:06:00.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi bus_master cap_list rom
configuration: driver=sdhci-pci latency=0
ressources: irq:18 mémoire:c0400000-c04000ff mémoire:c0700000-c070ffff
*-generic:1 NON-RÉCLAMÉ
description: SD Host controller
produit: Standard SD Host Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0.2
information bus: pci@0000:06:00.2
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi cap_list
configuration: latency=0
ressources: mémoire:c0400100-c04001ff
*-generic:2
description: System peripheral
produit: MS Host Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0.3
information bus: pci@0000:06:00.3
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi bus_master cap_list
configuration: driver=jmb38x_ms latency=0
ressources: irq:18 mémoire:c0400200-c04002ff
*-generic:3 NON-RÉCLAMÉ
description: System peripheral
produit: xD Host Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0.4
information bus: pci@0000:06:00.4
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi bus_master cap_list
configuration: latency=0
ressources: mémoire:c0400300-c04003ff
*-pci:3
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 4
fabriquant: Intel Corporation
identifiant matériel: 1c.3
information bus: pci@0000:00:1c.3
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:43 portE/S:5000(taille=4096) mémoire:c0a00000-c0cfffff portE/S:c0d00000(taille=2097152)
*-network
description: Interface réseau sans fil
produit: AR928X Wireless Network Adapter (PCI-Express)
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:07:00.0
nom logique: wlan0
version: 01
numéro de série: 00:24:2b:51:ca:68
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=3.13.0-66-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
ressources: irq:19 mémoire:c0a00000-c0a0ffff
*-pci:4
description: PCI bridge
produit: 82801I (ICH9 Family) PCI Express Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:44 portE/S:6000(taille=4096) mémoire:c0f00000-c11fffff portE/S:c1200000(taille=2097152)
*-network
description: Ethernet interface
produit: NetXtreme BCM5764M Gigabit Ethernet PCIe
fabriquant: Broadcom Corporation
identifiant matériel: 0
information bus: pci@0000:09:00.0
nom logique: eth0
version: 10
numéro de série: 00:23:8b:70:ad:80
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=sb v2.18 ip=192.168.1.12 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources: irq:47 mémoire:c0f00000-c0f0ffff
*-usb:4
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:23 portE/S:1860(taille=32)
*-usb:5
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1d.1
information bus: pci@0000:00:1d.1
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:1880(taille=32)
*-usb:6
description: USB controller
produit: 82801I (ICH9 Family) USB UHCI Controller #3
fabriquant: Intel Corporation
identifiant matériel: 1d.2
information bus: pci@0000:00:1d.2
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:18a0(taille=32)
*-usb:7
description: USB controller
produit: 82801I (ICH9 Family) USB2 EHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d.7
information bus: pci@0000:00:1d.7
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:f0504c00-f0504fff
*-pci:5
description: PCI bridge
produit: 82801 Mobile PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: 93
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
*-isa
description: ISA bridge
produit: ICH9M LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-storage
description: SATA controller
produit: 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 03
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:45 portE/S:18f0(taille=8) portE/S:18e4(taille=4) portE/S:18e8(taille=8) portE/S:18e0(taille=4) portE/S:18c0(taille=32) mémoire:f0504000-f05047ff
*-serial NON-RÉCLAMÉ
description: SMBus
produit: 82801I (ICH9 Family) SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 03
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:c1400000-c14000ff portE/S:1c00(taille=32)
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Hitachi HTS54323
fabriquant: Hitachi
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: FB4O
numéro de série: 081217FB2406LECVVEUC
taille: 298GiB (320GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=d3d22b2d
*-volume:0
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /
version: 1.0
numéro de série: 16a9fbde-0afa-4406-994a-03f27b2b40c8
taille: 14GiB
capacité: 14GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2015-11-01 13:15:34 filesystem=ext4 lastmountpoint=/ modified=2015-11-01 14:07:24 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2015-11-01 14:07:24 state=mounted
*-volume:1
description: Linux swap volume
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
version: 1
numéro de série: a9679344-aeb2-4b61-82da-0f00d21cadf0
taille: 4250MiB
capacité: 4250MiB
fonctionnalités: primary swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@0:0.0.0,3
nom logique: /dev/sda3
nom logique: /home
version: 1.0
numéro de série: 09f303f4-5927-46e5-a898-c094f49f791f
taille: 279GiB
capacité: 279GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2015-10-31 17:35:59 filesystem=ext4 lastmountpoint=/home modified=2015-11-01 14:35:28 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2015-11-01 14:35:28 state=mounted
*-scsi:1
identifiant matériel: 2
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: CDDVDW TS-L633A
fabriquant: TSSTcorp
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: AC00
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-battery
description: Lithium Ion Battery
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1
emplacement: Rear
capacité: 1000mWh
configuration: voltage=0,0V
*-remoteaccess NON-RÉCLAMÉ
fabriquant: Intel
identifiant matériel: 2
fonctionnalités: outbound
The sensors commands:
$ sudo /usr/sbin/sensors-detect
# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
# System: Acer, inc. Aspire 7730ZG [Not Applicable]
# Board: Acer, Inc. Mammoth
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0xfc11
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): YES
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.
Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-0)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: NVIDIA i2c adapter 5 at 1:00.0 (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: SMBus I801 adapter at 1c00 (i2c-4)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)NO
Unloading i2c-dev... OK
Unloading i2c-i801... OK
Unloading cpuid... OK
$ The actual /etc/default/grub (with grup prior updated, and a reboot done since):
$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_enforce_resources=lax"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
$
kernel:
$ uname -r
3.13.0-66-generic
$and the result of the
pwmconfig command:
$ sudo /usr/sbin/pwmconfig
# pwmconfig revision 6166 (2013-05-01)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.
We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
$Now the deal is to try to find a solution to make the fan start less often, and be ruled by the sensors.
Thanks for helping!
