Messages récents

Pages: 1 ... 8 9 [10]
Travaux contributifs dans le Libre / Re : Re : Bento Bionic en construction
« Dernier message par melodie le 16 février 2018 à 19:36:19 »
Bonne idée

Merci Marc !

et s'il y a des libristes de ton GULL qui ont envie de participer et d'essayer chez eux, ils sont les bienvenus ! Cela pourrait être cool de travailler dessus à plusieurs. ;)

Travaux contributifs dans le Libre / Re : Bento Bionic en construction
« Dernier message par mhep le 16 février 2018 à 19:22:48 »
Bonne idée
Help requests / Re : Error message on remaster install
« Dernier message par melodie le 25 janvier 2018 à 23:53:06 »
Hi Taco.22,

I checked, and indeed no isolinux in Trusty. To get it, you might want to upgrade to Xenial. In Trusty, I still use an older version of Customizer:

and it is xorriso which comes out when searching for isolinux (ad bootcd, but xorriso was already in the list of packages to install before compiling customizer):

$ apt-cache search isolinux
xorriso - outil de manipulation ISO-9660 et Rock Ridge en ligne de commande
bootcd - Lance votre système à partir d'un CD sans avoir besoin de disques

(Tried "LANG=C" to output it in English, but it didn't work in that remote system)

You seem to have found a way to make it work in 14.04 with the latest customizer version, so I think it's ok and you don't need to change?
Help requests / Re : Error message on remaster install
« Dernier message par Taco.22 le 24 janvier 2018 à 13:09:38 »
Hi Mélodie,

I'll give that script a run in the next few days - I've tweaked the work directory line.  I only use the X220 when doing maintenance but I don't recall any issues with the keyboard - seemed all normal to me.  Maybe you need to define "jerky".  What I can't stand about laptops is the scroll pad though - I have to connect a mouse!

I had to install isolinux from a 16.04 repo.  Did you get yours from a 14.04 repo or some other place?

EDIT - decided not to wait and tried the script!  Worked out to run as su.  Neat!  Moves the ISO out of the work directory, which allows Customizer to rebuild if needed.  I'll have to dd and boot to see what the result is.
Help requests / Re : Error message on remaster install
« Dernier message par melodie le 21 janvier 2018 à 14:33:52 »
Hi, if you want to use "dd" to create your bootable USB devices you need to have isohybrid in the machine installed where you remaster and use a script after building to make a few changes on the ISO created by Customizer. Here is one of them, for an example:

(You get all my little tricks he he!  ;-) )

/Scripts that I orgininally didn't even make myself… But I use them, and tweak them as time goes.




mv /home/Ubuntu-$ARCH-$VERSION.iso $ISONAME
chmod a-x $ISONAME
isohybrid $ISONAME
md5sum $ISONAME > $ISONAME.md5sum
chown $USER:$GROUP $ISONAME.md5sum

arguments are in high cases, $XYZY stands for the value you insert after the sign '=' which comes after the argument.

the line "mv /home/Ubuntu-$ARCH-$VERSION.iso $ISONAME"  will have to be tweaked as maybe now the default is having the work directory under "/home/customizer" and no more under "/home" as it used to be, unless you changed that part to something else, then adapt it accordingly.

If you have questions about the rest of the script, please send! (users and groups are different on the remote server on which I build than locally, etc.)

Yes, I still have my x220. I had broken the motherboard, but I bought another one on ebay and I changed it. I don't like the way the keyboard behaves, it feels very jerky, (I type with 10 fingers fast enough) and I don't see any way around, unless I plugin an external keyboard. Is the one you have jerkey? If you know about a solution I'd like to have it. :)

PS: isohybrid belongs to the syslinux package, which is probably installed in your system.
Help requests / Re : Error message on remaster install
« Dernier message par Taco.22 le 21 janvier 2018 à 02:11:51 »
Hi Mélodie,

Well there had to be a catch somewhere!  Using Customizer to remix the ISO is the easy bit.  Getting the finished ISO onto a USB stick has been an exercise in frustration.  I had used VBox, Pinguy Builder and Customizer on Lou's computer, and I think things were getting a bit confused.  I also kept getting corrupted or borked file systems on USB sticks when trying to install on to them.  I was constantly reformating to fat32 as they failed to boot, or the installer failed to work.  Sometimes there was a "Boot Failure" error right at the start, other times failure struck during installation, and never at quite the same point   To install onto a stick I used Startup Disk Creator, Unetbootin and dd - all were hit and miss.  That error message that I mentioned in the first post even popped up when I was installing Bento 64bit onto my computer, but with an option to skip - hadn't seen that before!

Anyway, long story short, after making many attempts to build and burn a workable ISO on my wife's computer I have done a clean install of Bento 64bit onto my computer (it had the 32bit version previously), modified the system to my specs and then did a clean install of Customizer.  I have remixed my version of Bento in Customizer and installed onto a USB stick with Startup Disk Creator.  On booting Lou's computer I hit a login window.  No go.  However booting straight to the installer worked - I need to boot my computer from another hard drive to see if it goes through with the install.  Am I missing any tweaks that need to be made with Customizer?  I'm also thinking of buying a couple of new USB sticks as mine are starting to get a bit used and abused - they do wear out in the end.

Just for fun I have included a shot of my "desktop", showing embedded terminal at top left, conky at top right, trayer at bottom right, and Thunar in TWIN PANE mode - that's a patched version I found.  It also has a lovely wallpaper I found years ago and still remains my favourite Openbox background.  Maybe I should post a write up of the specs elsewhere.

P.S - I noticed on a post you made somewhere - can't remember where - that you had a Lenovo X220 laptop.  Do you still have it?  We bought a refurbished one for our daughter the year before last.  It's a great laptop and even came with the dock.  I couldn't bring myself to buy a newer crap brand with Windows 10 installed!
Help requests / Re : Re : Error message on remaster install
« Dernier message par melodie le 17 janvier 2018 à 13:26:51 »
Why haven't I been using this ages ago?!?

because you haven't met with Kamilion, who is a fantastic person. He lives in US west coast, and used Customizer long before he started to take care of the code (which has a history of several maintainers since the original author).

He is the one who has advised me to use it after Ubuntu Builder was obsoleted. You can meet him on the IRC chan #lxde on, for instance.

Thanks very much for the heads-up on this - much appreciated  :D

you are most welcome!

Help requests / Re : Error message on remaster install
« Dernier message par Taco.22 le 17 janvier 2018 à 07:29:02 »
Hi Mélodie,

Well that got a little complicated as obviously I didn't have the approriate repo activated!  "Apt-cache show isolinux" had nothing to show.  In the end I used "pool/main/s/syslinux/isolinux_6.03+dfsg-11ubuntu1_all.deb" as a search term and edited my sources.list appropriately.  I did have the latest Customizer and now all works well. 

I must say that this is so easy it's silly!  It's way less work than configuring a system on a separate or virtual hard drive, and having to remaster an ISO and boot from it before you realise there is a mistake.  This way you can see the result and make corrections, additions or edits on the run.  I can also search the net, use/edit my config files, or edit image files at the same time.  Why haven't I been using this ages ago?!?

Thanks very much for the heads-up on this - much appreciated  :D   
Help requests / Re : Error message on remaster install
« Dernier message par melodie le 17 janvier 2018 à 05:16:38 »
Also get the latest code available, not the one from the old github which is mentioned in the "First guide". follow the green button..
Pages: 1 ... 8 9 [10]