Auteur Sujet: [CPUFreq] Optimiser Bento Openbox sur un EEE PC 1225b :: Question sur la latence ? (Résolu)  (Lu 6079 fois)

0 Membres et 2 Invités sur ce sujet

Hors ligne melodie

  • Administrateur
  • Membre Héroïque
  • *****
  • Messages: 1777
    • Citrotux
Salut,

Après avoir installé Bento Openbox, en double démarrage avec un Windows 7 home édition quasi inutilisable sur cette machine, j'ai eu une mauvaise surprise sur un simple réglage des icônes sur LXPanel : l'interface de réglage du panel se bloquait juste au moment de régler la taille des icônes. D'autres blocages ont/avaient lieu.

Une recherche m'amenait d'abord vers les problèmes de carte graphique, (Radeon HD 6290), et tous ces posts avec des conseils qui n'ont pas l'air de trop fonctionner. Ensuite, sachant que la carte graphique est intégrée au CPU, j'ai commencé à regarder ce que je pourrais faire avec cpufreqd cpufreq-utils, et quoi ajouter.

acpid est installé. J'ai ajouté mesa-vdpau-drivers (parce que ça ne me semblait pas une mauvaise idée), cpufreqd, cpufreq-utils, amd64-microcode, parce que c'est fait pour ce CPU, acpitool, mais je n'ai pas encore essayé de l'utiliser, supprimé at-spi2-core parce qu'il utilise un peu de CPU et n'est pas nécessaire, et là evince est parti, alors je l'ai remplacé par xpdf. (Parce qu'il n'y a pas d'autre choix léger).

Pour comprendre ce qui se passe vraiment, j'ai lancé htop à plusieurs reprises, tout en utilisant des programmes plus ou moins gourmands en ressources, tels que Synaptic, et encore plus gourmand, la Logithèque Ubuntu.

Le kernel: 3.13.0-63-generic x86_64

Les composants:
computer
    description: Ordinateur Bloc-notes
    produit: 1225B (1225B)
    fabriquant: ASUSTeK Computer Inc.
    version: 1.0
    numéro de série: [REMOVED]
    bits: 64 bits
    fonctionnalités: smbios-2.7 dmi-2.7 vsyscall32
    configuration: boot=normal chassis=notebook family=ASUS Family sku=1225B uuid=[REMOVED]
  *-core
       description: Carte mère
       produit: 1225B
       fabriquant: ASUSTeK Computer Inc.
       identifiant matériel: 0
       version: 209
       numéro de série: [REMOVED]
       emplacement: MIDDLE
     *-firmware
          description: BIOS
          fabriquant: American Megatrends Inc.
          identifiant matériel: 0
          version: 209
          date: 06/05/2012
          taille: 64KiB
          capacité: 1984KiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          produit: AMD C-60 APU with Radeon(tm) HD Graphics
          fabriquant: Advanced Micro Devices [AMD]
          identifiant matériel: 4
          information bus: cpu@0
          version: AMD C-60 APU with Radeon(tm) HD Graphics
          numéro de série: [REMOVED]
          emplacement: CPU 1
          taille: 800MHz
          capacité: 1GHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt arat cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter vmmcall cpufreq
          configuration: cores=2 enabledcores=2
        *-cache:0
             description: L1 cache
             identifiant matériel: 5
             emplacement: L1-Cache
             taille: 128KiB
             capacité: 128KiB
             fonctionnalités: internal write-back unified
        *-cache:1
             description: L2 cache
             identifiant matériel: 6
             emplacement: L2-Cache
             taille: 1MiB
             capacité: 1MiB
             fonctionnalités: internal varies data
     *-memory
          description: Mémoire Système
          identifiant matériel: 26
          emplacement: Carte mère
          taille: 4GiB
        *-bank:0
             description: DIMM DDR3 Synchrone 1333 MHz (0,8 ns)
             produit: Array1_PartNumber0
             fabriquant: A1_Manufacturer0
             identifiant matériel: 0
             numéro de série: [REMOVED]
             emplacement: A1_DIMM0
             taille: 4GiB
             bits: 64 bits
             horloge: 1333MHz (0.8ns)
        *-bank:1
             description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2014-03-11 13:12+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2014-07-07 12:12+0000X-Generator: Launchpad (build 17086) Synchrone [vide]
             produit: Array1_PartNumber1
             fabriquant: A1_Manufacturer1
             identifiant matériel: 1
             numéro de série: [REMOVED]
             emplacement: A1_DIMM1
     *-pci:0
          description: Host bridge
          produit: Family 14h Processor Root Complex
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 00
          bits: 32 bits
          horloge: 66MHz
          configuration: latency=32
        *-display
             description: VGA compatible controller
             produit: Wrestler [Radeon HD 6290]
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 1
             information bus: pci@0000:00:01.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
             configuration: driver=radeon latency=0
             ressources: irq:44 mémoire:c0000000-cfffffff portE/S:f000(taille=256) mémoire:feb00000-feb3ffff
        *-multimedia:0
             description: Audio device
             produit: Wrestler HDMI Audio
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 1.1
             information bus: pci@0000:00:01.1
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pm pciexpress msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             ressources: irq:45 mémoire:feb44000-feb47fff
        *-pci:0
             description: PCI bridge
             produit: Family 14h Processor Root Port
             fabriquant: Advanced Micro Devices, Inc. [AMD]
             identifiant matériel: 4
             information bus: pci@0000:00:04.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:1000(taille=4096) mémoire:d0100000-d02fffff portE/S:d0300000(taille=2097152)
        *-storage
             description: SATA controller
             produit: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 11
             information bus: pci@0000:00:11.0
             version: 40
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: storage ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=32
             ressources: irq:19 portE/S:f140(taille=8) portE/S:f130(taille=4) portE/S:f120(taille=8) portE/S:f110(taille=4) portE/S:f100(taille=16) mémoire:feb4f000-feb4f3ff
        *-usb:0
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12
             information bus: pci@0000:00:12.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:feb4e000-feb4efff
        *-usb:1
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 12.2
             information bus: pci@0000:00:12.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             ressources: irq:17 mémoire:feb4d000-feb4d0ff
        *-usb:2
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13
             information bus: pci@0000:00:13.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:feb4c000-feb4cfff
        *-usb:3
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 13.2
             information bus: pci@0000:00:13.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             ressources: irq:17 mémoire:feb4b000-feb4b0ff
        *-serial NON-RÉCLAMÉ
             description: SMBus
             produit: SBx00 SMBus Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 42
             bits: 32 bits
             horloge: 66MHz
             configuration: latency=0
        *-multimedia:1
             description: Audio device
             produit: SBx00 Azalia (Intel HDA)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.2
             information bus: pci@0000:00:14.2
             version: 40
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             ressources: irq:16 mémoire:feb40000-feb43fff
        *-isa
             description: ISA bridge
             produit: SB7x0/SB8x0/SB9x0 LPC host controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.3
             information bus: pci@0000:00:14.3
             version: 40
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: isa bus_master
             configuration: latency=0
        *-pci:1
             description: PCI bridge
             produit: SBx00 PCI to PCI Bridge
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.4
             information bus: pci@0000:00:14.4
             version: 40
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pci subtractive_decode bus_master vga_palette
        *-usb:4
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 14.5
             information bus: pci@0000:00:14.5
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:feb4a000-feb4afff
        *-pci:2
             description: PCI bridge
             produit: SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 15
             information bus: pci@0000:00:15.0
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16
        *-pci:3
             description: PCI bridge
             produit: SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 15.1
             information bus: pci@0000:00:15.1
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 mémoire:fea00000-feafffff
           *-network
                description: Network controller
                produit: BCM4313 802.11bgn Wireless Network Adapter
                fabriquant: Broadcom Corporation
                identifiant matériel: 0
                information bus: pci@0000:04:00.0
                version: 01
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list
                configuration: driver=bcma-pci-bridge latency=0
                ressources: irq:17 mémoire:fea00000-fea03fff
        *-pci:4
             description: PCI bridge
             produit: SB900 PCI to PCI bridge (PCIE port 2)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 15.2
             information bus: pci@0000:00:15.2
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 mémoire:fe900000-fe9fffff
           *-usb
                description: USB controller
                produit: ASM1042 SuperSpeed USB Host Controller
                fabriquant: ASMedia Technology Inc.
                identifiant matériel: 0
                information bus: pci@0000:05:00.0
                version: 00
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: msi msix pm pciexpress xhci bus_master cap_list
                configuration: driver=xhci_hcd latency=0
                ressources: irq:18 mémoire:fe900000-fe907fff
        *-pci:5
             description: PCI bridge
             produit: SB900 PCI to PCI bridge (PCIE port 3)
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 15.3
             information bus: pci@0000:00:15.3
             version: 00
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             ressources: irq:16 portE/S:e000(taille=4096) portE/S:d0000000(taille=1048576)
           *-network
                description: Ethernet interface
                produit: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
                fabriquant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:06:00.0
                nom logique: eth0
                version: 05
                numéro de série: [REMOVED]
                taille: 100Mbit/s
                capacité: 100Mbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=[REMOVED] latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
                ressources: irq:43 portE/S:e000(taille=256) mémoire:d0004000-d0004fff mémoire:d0000000-d0003fff
        *-usb:5
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: ohci bus_master
             configuration: driver=ohci-pci latency=32
             ressources: irq:18 mémoire:feb49000-feb49fff
        *-usb:6
             description: USB controller
             produit: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
             identifiant matériel: 16.2
             information bus: pci@0000:00:16.2
             version: 00
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             ressources: irq:17 mémoire:feb48000-feb480ff
     *-pci:1
          description: Host bridge
          produit: Family 12h/14h Processor Function 0
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 101
          information bus: pci@0000:00:18.0
          version: 43
          bits: 32 bits
          horloge: 33MHz
     *-pci:2
          description: Host bridge
          produit: Family 12h/14h Processor Function 1
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 102
          information bus: pci@0000:00:18.1
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:3
          description: Host bridge
          produit: Family 12h/14h Processor Function 2
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 103
          information bus: pci@0000:00:18.2
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:4
          description: Host bridge
          produit: Family 12h/14h Processor Function 3
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 104
          information bus: pci@0000:00:18.3
          version: 00
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=k10temp
          ressources: irq:0
     *-pci:5
          description: Host bridge
          produit: Family 12h/14h Processor Function 4
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 105
          information bus: pci@0000:00:18.4
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:6
          description: Host bridge
          produit: Family 12h/14h Processor Function 6
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 106
          information bus: pci@0000:00:18.5
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:7
          description: Host bridge
          produit: Family 12h/14h Processor Function 5
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 107
          information bus: pci@0000:00:18.6
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-pci:8
          description: Host bridge
          produit: Family 12h/14h Processor Function 7
          fabriquant: Advanced Micro Devices, Inc. [AMD]
          identifiant matériel: 108
          information bus: pci@0000:00:18.7
          version: 00
          bits: 32 bits
          horloge: 33MHz
     *-scsi
          identifiant matériel: 1
          nom logique: scsi0
          fonctionnalités: emulated
        *-disk
             description: ATA Disk
             produit: TOSHIBA MQ01ABD0
             fabriquant: Toshiba
             identifiant matériel: 0.0.0
             information bus: scsi@0:0.0.0
             nom logique: /dev/sda
             version: AX00
             numéro de série: [REMOVED]
             taille: 465GiB (500GB)
             fonctionnalités: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=4096 signature=037b1d89
           *-volume:0
                description: Windows NTFS volume
                identifiant matériel: 1
                information bus: scsi@0:0.0.0,1
                nom logique: /dev/sda1
                version: 3.1
                numéro de série: [REMOVED]
                taille: 100GiB
                capacité: 100GiB
                fonctionnalités: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2014-09-24 19:00:26 filesystem=ntfs state=clean
           *-volume:1
                description: Windows FAT volume
                fabriquant: MSDOS5.0
                identifiant matériel: 2
                information bus: scsi@0:0.0.0,2
                nom logique: /dev/sda2
                version: FAT32
                numéro de série: [REMOVED]
                taille: 14GiB
                capacité: 14GiB
                fonctionnalités: primary hidden fat initialized
                configuration: FATs=2 filesystem=fat
           *-volume:2
                description: Extended partition
                identifiant matériel: 3
                information bus: scsi@0:0.0.0,3
                nom logique: /dev/sda3
                taille: 350GiB
                capacité: 350GiB
                fonctionnalités: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                   description: Linux swap / Solaris partition
                   identifiant matériel: 5
                   nom logique: /dev/sda5
                   capacité: 4125MiB
                   fonctionnalités: nofs
              *-logicalvolume:1
                   description: Linux filesystem partition
                   identifiant matériel: 6
                   nom logique: /dev/sda6
                   nom logique: /
                   capacité: 20GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted
              *-logicalvolume:2
                   description: Linux filesystem partition
                   identifiant matériel: 7
                   nom logique: /dev/sda7
                   nom logique: /home
                   capacité: 326GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
  *-network
       description: Interface réseau sans fil
       identifiant matériel: 1
       nom logique: wlan0
       numéro de série: [REMOVED]
       fonctionnalités: ethernet physical wireless
       configuration: broadcast=yes driver=brcmsmac driverversion=3.13.0-63-generic firmware=610.812 ip=[REMOVED] link=yes multicast=yes wireless=IEEE 802.11bgn

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32

00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6290] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at f000 [size=256]
Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c  Data: 41c1
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: radeon

00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c  Data: 41d1
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel

00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0100000-d02fffff
Prefetchable memory behind bridge: 00000000d0300000-00000000d04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise-
Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis+
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb4f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4d000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb4c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb4b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feb4a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport

00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb49000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb48000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

04:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: AzureWave Device 2047
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-de-ff-ff-15-dc-85
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00002080
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel driver in use: xhci_hcd

06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 103b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c  Data: 41b1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 0d-00-00-00-36-4c-e0-00
Kernel driver in use: r8169


Module                  Size  Used by
arc4                   12608  2
brcmsmac              563041  0
cordic                 12574  1 brcmsmac
brcmutil               15618  1 brcmsmac
b43                   387371  0
mac80211              630728  2 b43,brcmsmac
eeepc_wmi              13151  0
cfg80211              484040  3 b43,brcmsmac,mac80211
asus_wmi               24191  1 eeepc_wmi
sparse_keymap          13948  1 asus_wmi
ssb                    62379  1 b43
dm_multipath           22873  0
scsi_dh                14882  1 dm_multipath
kvm_amd                60026  0
kvm                   455843  1 kvm_amd
uvcvideo               80885  0
videobuf2_vmalloc      13216  1 uvcvideo
serio_raw              13462  0
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         40664  1 uvcvideo
joydev                 17381  0
videodev              134688  2 uvcvideo,videobuf2_core
k10temp                13126  0
snd_hda_codec_realtek    65812  1
snd_hda_codec_hdmi     46368  1
snd_hda_intel          56531  5
snd_seq_midi           13324  0
bnep                   19624  2
btusb                  32412  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_hda_codec         193017  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
rfcomm                 69160  8
bluetooth             391136  22 bnep,btusb,rfcomm
snd_hwdep              13602  1 snd_hda_codec
bcma                   52096  3 b43,brcmsmac
snd_rawmidi            30144  1 snd_seq_midi
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
i2c_piix4              22155  0
snd_timer              29482  2 snd_pcm,snd_seq
snd                    69322  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12680  1 snd
shpchp                 37032  0
mac_hid                13205  0
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
btrfs                 835994  0
xor                    21411  1 btrfs
raid6_pq               97812  1 btrfs
libcrc32c              12644  1 btrfs
dm_mirror              22135  0
dm_region_hash         20862  1 dm_mirror
dm_log                 18411  2 dm_region_hash,dm_mirror
hid_generic            12548  0
usbhid                 52659  0
hid                   106148  2 hid_generic,usbhid
psmouse               106692  0
r8169                  71677  0
radeon               1522902  3
mii                    13934  1 r8169
ahci                   34091  3
libahci                32716  1 ahci
i2c_algo_bit           13413  1 radeon
ttm                    93424  1 radeon
video                  19476  1 asus_wmi
drm_kms_helper         55071  1 radeon
drm                   303102  5 ttm,drm_kms_helper,radeon
wmi                    19177  1 asus_wmi

Voici les réglages pour cpufreq: il existe un fichier de configuration sous /etc, cpufreqd.conf.

Je l'ai modifié de cette manière:
diff :
$ diff cpufreqd.conf-BACKUP cpufreqd.conf
42,46c42,46
< [Profile]
< name=Performance High
< minfreq=100%
< maxfreq=100%
< policy=performance
---
> #[Profile]
> #name=Performance High
> #minfreq=100%
> #maxfreq=100%
> #policy=performance
48c48
< [/Profile]
---
> #[/Profile]
71,77c71,77
< #[Profile]
< #name=Conservative High
< #minfreq=33%
< #maxfreq=100%
< #policy=conservative
< #[/Profile]
< #
---
> [Profile]
> name=Conservative High
> minfreq=33%
> maxfreq=100%
> policy=conservative
> [/Profile]
>
138c138
< programs=xine,mplayer,gmplayer
---
> programs=xine,mplayer,gmplayer,parole

puis modifié à nouveau, parce que le CPU 1 était toujours à 100% quand un programme sollicitait ses ressources. J'ai voulu moduler, tout en permettant l'usage des commandes en console root ("cpufreq-set -c 1 -g powersave")

et maintenant le voici:
# this is a comment
# see CPUFREQD.CONF(5) manpage for a complete reference
#
# Note: ondemand/conservative Profiles are disabled because
#       they are not available on many platforms.

[General]
pidfile=/var/run/cpufreqd.pid
poll_interval=2
verbosity=4
#enable_remote=1
#remote_group=root
[/General]

#[acpi]
#acpid_socket=/var/run/acpid.socket
#[/acpi]

#[nforce2_atxp1]
#vcore_path=/some/path
#vcore_default=1500
#[/nforce2_atxp1]

#[sensors_plugin]
#sensors_conf=/some/file
#[/sensors_plugin]

#[Profile]
#name=On Demand High
#minfreq=40%
#maxfreq=100%
#policy=ondemand
#[/Profile]
#
#[Profile]
#name=On Demand Low
#minfreq=20%
#maxfreq=80%
#policy=ondemand
#[/Profile]

#[Profile]
#name=Performance High
#minfreq=100%
#maxfreq=100%
#policy=performance
#exec_post=echo 8 > /proc/acpi/sony/brightness
#[/Profile]

#[Profile]
#name=Performance Low
#minfreq=80%
#maxfreq=80%
#policy=performance
#[/Profile]

#[Profile]
#name=Powersave High
#minfreq=60%
#maxfreq=60%
#policy=powersave
#[/Profile]

[Profile]
name=Powersave Low
minfreq=40%
maxfreq=40%
policy=powersave
[/Profile]

[Profile]
name=Conservative High
minfreq=33%
maxfreq=100%
policy=conservative
[/Profile]

#[Profile]
#name=Conservative Low
#minfreq=0%
#maxfreq=66%
#policy=conservative
#[/Profile]

##
# Basic states
##
# when AC use performance mode
[Rule]
name=AC Rule
ac=on                    # (on/off)
profile=Performance High
[/Rule]
 
# stay in performance mode for the first minutes
[Rule]
name=AC Off - High Power
ac=off                   # (on/off)
battery_interval=70-100
#exec_post=echo 5 > /proc/acpi/sony/brightness
profile=Performance Low
[/Rule]

# conservative mode when not AC
[Rule]
name=AC Off - Medium Battery
ac=off                   # (on/off)
battery_interval=30-70
#exec_post=echo 3 > /proc/acpi/sony/brightness
profile=Powersave High
[/Rule]

# conservative mode when not AC
[Rule]
name=AC Off - Low Battery
ac=off                   # (on/off)
battery_interval=0-30
#exec_post=echo 3 > /proc/acpi/sony/brightness
profile=Powersave Low
[/Rule]

##
# Special Rules
##
# CPU Too hot!
[Rule]
name=CPU Too Hot
acpi_temperature=55-100
cpu_interval=50-100
profile=Performance Low
[/Rule]

# use performance mode if I'm watching a movie
# I don't care for batteries!
# But don't heat too much.
[Rule]
name=Movie Watcher
programs=xine,mplayer,gmplayer,parole
battery_interval=0-100
acpi_temperature=0-60
cpu_interval=0-100
profile=Performance High
[/Rule]

Et maintenant, cpufreq-info annonce:

    $ cpufreq-info
    cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
    Veuillez rapportez les erreurs et les bogues à cpufreq@vger.kernel.org, s'il vous plait.
    analyse du CPU 0 :
      pilote : acpi-cpufreq
      CPUs which run at the same hardware frequency: 0
      CPUs which need to have their frequency coordinated by software: 0
      maximum transition latency: 4294.55 ms.
      limitation matérielle : 800 MHz - 1000 MHz
      plage de fréquence : 1000 MHz, 800 MHz
      régulateurs disponibles : conservative, ondemand, userspace, powersave, performance
      tactique actuelle : la fréquence doit être comprise entre 800 MHz et 800 MHz.
                      Le régulateur "conservative" est libre de choisir la vitesse
                      dans cette plage de fréquences.
      la fréquence actuelle de ce CPU est 800 MHz.
      des statistique concernant cpufreq:1000 MHz:30,83%, 800 MHz:69,17%  (51)
    analyse du CPU 1 :
      pilote : acpi-cpufreq
      CPUs which run at the same hardware frequency: 1
      CPUs which need to have their frequency coordinated by software: 1
      maximum transition latency: 4294.55 ms.
      limitation matérielle : 800 MHz - 1000 MHz
      plage de fréquence : 1000 MHz, 800 MHz
      régulateurs disponibles : conservative, ondemand, userspace, powersave, performance
      tactique actuelle : la fréquence doit être comprise entre 800 MHz et 800 MHz.
                      Le régulateur "powersave" est libre de choisir la vitesse
                      dans cette plage de fréquences.
      la fréquence actuelle de ce CPU est 800 MHz.
      des statistique concernant cpufreq:1000 MHz:30,83%, 800 MHz:69,17%  (49)
    $



Cette latence peut-elle être configurée différemment, et en fonction de quels critères ?

« Modifié: 07 septembre 2015 à 01:02:31 par melodie »
Good leaders being scarce, following yourself is allowed.

Hors ligne mimas

  • Général du Roi
  • Membre Complet
  • ***
  • Messages: 114
  • Jamais content
    • G+
Re : [EEE PC 1225b] Optimiser Bento Openbox :: Question sur la latence ?
« Réponse #1 le: 04 septembre 2015 à 14:40:37 »
Il ne doit y en avoir qu'un pour tous les gouverner : « ondemand ».

Pour le desktop, c'est le seul sélecteur à utiliser car il réagit rapidement à la moindre sollicitation du système. Il induit une latence minimum comparé aux autres qui lissent la montée en puissance du CPU, donc allongent le temps entre la demande de puissance et la monté en puissance.

Le sélecteur « conservative » est une variante moins agressive de « ondemand », sur un desktop. Ce sélecteur revient à se mettre à courir avec des bottes en caoutchouc dans un champ boueux ; ça colle et on espère atteindre la fin du champ.

Mais attention, « ondemand » est le meilleur pour le bureau car on veut que l'ordinateur réagisse rapidement. Dans d'autres cas, on souhaitera peut-être maîtriser la consommation et éviter des pics, donc faire le choix d'autres sélecteurs ne priorisant pas la réactivité.
When any government, or any church for that matter, undertakes to say to its subjects, "This you may not read, this you must not see, this you are forbidden to know," the end result is tyranny and oppression, no matter how holy the motives.

Hors ligne melodie

  • Administrateur
  • Membre Héroïque
  • *****
  • Messages: 1777
    • Citrotux
Effectivement, "ondemand" est le gagnant. Ce petit netbook (que je ne recommanderai à personne vu le processeur faiblard) fonctionne enfin normalement (sans se traîner comme un perdu, ce qu'il faisait déjà sous Windows).

Merci mimas !
Good leaders being scarce, following yourself is allowed.